Pan Encoder Pcb - Philips VARI-LITE VL4000 Spot Service Manual

❋
VARI LITE - VL4000 S

Pan Encoder PCB

Vari-Lite Part No: 17.9704.0910
To replace pan encoder PCB:
Step 1. Remove both enclosure covers following the procedure described in
Covers Removal" on page
Step 2. At pan encoder, disconnect wiring harness.
Note:
Drawing exploded and some
components removed for clarity.
Encoder PCB
Step 3. Remove 2 x 4-40 x 1/4" PFZ screws and remove encoder.
Step 4. Replace in reverse order.
32
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
Note:
Drawing exploded and some
components removed for clarity.
M
ANUAL
25.
Screws
"Upper Enclosure
Pan Bearing /
Pulley Assembly
Pan Bearing /
Pulley Assembly
02 .9 704 .00 10 A