Gobo Wheel 1 Rotate Motor - Philips VARI-LITE VL4000 Spot Service Manual

S

Gobo Wheel 1 Rotate Motor

Vari-Lite Part No: 44.9704.0217
To replace gobo wheel 1 rotate motor:
Step 1. Remove edge assembly following procedure in
Removal" on page
Step 2. Disconnect wiring from motor.
Step 3. Rotate shutter so hole aligns with mounting screw
Step 4. Remove 2 x M3 x .5 x 8 mm PPZ screws and 1 x M3 x .5 x 8 mm PFZ screw and remove
motor and spacer.
Note:
Drawing exploded and some
components removed for clarity.
Step 5. Loosen 2 x 6-32 x 3/16" cone set screw and remove pulley.
Step 6. Replace in reverse order.
02.97 04.001 0 A
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
P : G
ERVICE ROCEDURES
113.
Gobo 1 Rotate Motor
/S /A
OBO HUTTER NIMATION
"Edge Motor Brackets and Support Brace
Gobo Wheel 1
Gobo 1 Rotate Motor Spacer
A C
SSEMBLY OMPONENTS
Gobo Wheel 2
Gobo Rotate Pulley
Cone Set Screw (x2)
Gobo Rotate Pulley
2
115