Philips VARI-LITE VL4000 Spot Service Manual page 147

Step 3. Remove 1 x 4-40 x ¼" PPZ SEMS screw and remove board.
Step 4. On replacement board, set dip switches as follows:
a. DIP SW 1 ON
b. DIP SW 2 ON
c. DIP SW 3 OFF
d. DIP SW 4 ON
Step 5. Replace in reverse. Ensure wiring connections are fully seated into board.
02.97 04.001 0 A
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
S
ERVICE
2) 2 - BM2 FIX 2 - Fixed Color Wheel 2 Motor
3) 3 - BM3 FIX 1 - Fixed Color Wheel 1 Motor
4) 4 - BM4 YEL - Yellow Motor
P : C
ROCEDURES OLOR
A C
SSEMBLY OMPONENTS
2
127