Gobo Wheel 1 Index Sensor And Wheel 1 Rotate Sensor - Philips VARI-LITE VL4000 Spot Service Manual

❋
VARI LITE - VL4000 S

Gobo Wheel 1 Index Sensor and Wheel 1 Rotate Sensor

Vari-Lite Part No: 17.9704.0905 (Index Sensor)
Vari-Lite Part No: 24.9678.3240 (Rotate Sensor)
To replace gobo wheel 1 index sensor and rotate sensor:
Step 1. Remove Gobo / Shutter / Animation Assembly following procedure in
Animation Assembly Removal" on page
Step 2. Disconnect wiring from both sensors.
Step 3. Remove 1 x 4-40 x 1/8" PFZ and 1 x 4-40 x ¼" PPZ screws and remove assembly.
Step 4. Depending on sensor to be replaced:
a. If replacing Index Sensor: Remove 2 x 2-56 x 1/8" PPZ screws and remove sensor,
b. If replacing Rotate Sensor: Remove 2 x 4-40 x ¼" PPZ screws and remove sensor,
Note:
Drawing exploded and some
components removed for clarity.
Step 5. Replace assembly in reverse
118
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
replace in reverse.
replace in reverse.
Gobo Wheel 1 Index Sensor
M
ANUAL
64.
Gobo Wheel 2
Gobo Wheel 1
Gobo Wheel 1 Index /
Rotate Sensors Assembly
(see detail)
Gobo Wheel 1 Rotate Sensor
"Gobo / Shutter /
Assembly Detail
02 .9 704 .00 10 A