Philips VARI-LITE VL4000 Spot Service Manual page 98

❋
VARI LITE - VL4000 S
c. Yellow/Black/Green/Blue - Bottom inlet fan
d. Sensor 1 - 5
e. Motor 1 - 5
Step 3. Remove 1 x 4-40 x ¼" PPZ SEMS screw and remove board.
Step 4. On replacement board, set dip switches as follows:
a. DIP SW 1 OFF
b. DIP SW 2 OFF
c. DIP SW 3 ON
d. DIP SW 4 ON
Step 5. Replace in reverse. Ensure wiring connections are fully seated into board.
78
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
1) 1 - ES1 P DIV - Prism Diversion Sensor
2) 2 - ES2 P ARM - Prism Arm Sensor
3) 3 - ES3 P ROT - Prism Rotate/Index Sensor
4) 4 - ES4 F DIV - Frost Diversion Sensor (21.9704.0150 ONLY)
5) 5 - ES5 F ARM - Frost Arm Sensor
1) 1 - FM1 P DIV - Prism Diversion Motor
2) 2 - FM2 P ARM - Prism Arm Motor
3) 3 - FM3 P ROT - Prism Rotate/Index Motor
4) 4 - FM4 F DIV - Frost Diversion Motor (21.9704.0150 ONLY)
5) 5 - FM5 F ARM - Frost Arm Motor
M
ANUAL
02 .9 704 .00 10 A