Zoom Or Compensation Sensor - Philips VARI-LITE VL4000 Spot Service Manual

❋
VARI LITE - VL4000 S

Zoom or Compensation Sensor

Vari-Lite Part No: 25.9678.0020
To replace zoom or compensation sensor:
Note: Refer to
Step 1. At sensor, disconnect inline wiring connector.
Step 2. Remove 2 x 4-40 x ¼" PPZ SEMS screws and remove sensor.
Note:
Drawing exploded and some
components removed for clarity.
4-40 x ¼" PPZ SEMS Screw (x2)
Step 3. Replace in reverse order.
82
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
"VL4000 Zoom Spot Assembly" on page 171
Zoom Sensor
M
ANUAL
for drawing.
Compensation Sensor
4-40 x ¼" PPZ
SEMS Screw (x2)
02 .9 704 .00 10 A