Driver Board D - Philips VARI-LITE VL4000 Spot Service Manual

❋
VARI LITE - VL4000 S

Driver Board D

Vari-Lite Part No: 24.9704.2901
To replace driver board D:
Step 1. Remove 3 x 4-40 x 3/8" PPZ SEMS screws that mount driver board clamp and remove
clamp.
Step 2. Disconnect wiring.
a. Orange/Red/Black - 36 & 12 VDC
b. COM in and out - Labeled Driver Board and shutter (note, does not matter which goes in
c. Red/Black/Orange/Brown - Gobo Fan
d. Sensor 1 - 4
96
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
Note:
Drawing exploded and some
components removed for clarity.
which connector on board)
1) 1 - DS1 FX INDEX 2 - Animation Wheel 2 Index Sensor
2) 2 - DS2 FX INDEX 1 - Animation Wheel 1 Index Sensor
3) 3 - DS3 FX ARM 1 - Animation Wheel 1 Arm Sensor
4) 4 - DS4 FX ARM 2 - Animation Wheel 2 Arm Sensor
M
ANUAL
Driver Board D
Driver Board Clamp
4-40 x3/8" PPZ SEMS Screw (x3)
Driver Board D
02 .9 704 .00 10 A