Philips VARI-LITE VL4000 Spot Service Manual page 117

S
e. Motor 1 - 4
Step 3. Remove 1 x 4-40 x ¼" PPZ SEMS screw and remove board.
Step 4. On replacement board, set dip switches as follows:
a. DIP SW 1 ON
b. DIP SW 2 OFF
c. DIP SW 3 OFF
d. DIP SW 4 OFF
Step 5. Replace in reverse. Ensure wiring connections are fully seated into board.
02.97 04.001 0 A
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
P : G
ERVICE ROCEDURES
1) 1 - DM1 FX INDEX 2 - Animation Wheel 2 Index Motor
2) 2 - DM2 FX INDEX 1 - Animation Wheel 1 Index Motor
3) 3 - DM3 FX ARM 1 - Animation Wheel 1 Arm Motor
4) 4 - DM4 FX ARM 2 - Animation Wheel 2 Arm Motor
/S /A
OBO HUTTER NIMATION
A C
SSEMBLY OMPONENTS
2
97