Strobe Assembly - Philips VARI-LITE VL4000 Spot Service Manual

❋
VARI LITE - VL4000 S

Strobe Assembly

Vari-Lite Part No: 21.9704.0431 (Left)
Vari-Lite Part No: 21.9704.0432 (Right)
To remove left and right strobe assemblies:
Step 1. Remove color assembly following procedure in
Wheel 1 Sensor" on page
Step 2. Disconnect wiring from strobe motors.
Step 3. Remove 4 x 4-40 x ½" PPZ screws from each motor assembly.
4-40 x 1/2"
PPZ Screw (x4)
Step 4. Carefully pull wiring from around motor.
Step 5. Lift both left and right assembly.
Note: The right assembly has light shield attached.
Step 6. Replace in Reverse order
142
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
L S
POT UMINAIRE ERVICE
Left Strobe Assembly
4-40 x 1/2"
PPZ Screw (x4)
M
ANUAL
"Fixed Color Wheel Assembly & Color
131.
Right Strobe Assembly
Note:
Drawing exploded and some
components removed for clarity.
02 .9 704 .00 10 A