Table of Contents
Advertisement
Installation & Setup Guide
7. Grandmasters Layout
The Grandmaster can be setup to control different Grand Master functions as determined by the PaletteOS software.
See
"Dead Black Out (DBO)" on page 64
Help Menu.
The console features two configurable Grandmaster
sliders and Dead Black Out buttons (A and B). These
can be used to control the overall intensity level of all
channels at once. The Grandmaster slider will
proportionally master intensity output, while the
[DBO] button, when engaged, sets all intensities to
zero. The LED flashes when the Grandmaster slider is
not at 100%. It flashes rapidly when the slider is at 0%.
Note: The console has software setup tabs for both the A and B Grandmasters. See
page 64
for more details.
8. Level Wheel
The console features a level wheel which provides navigation of the PaletteOS software and control of
channel attributes. The wheel is context sensitive to allow appropriate control of attributes such as one
percent, one DMX512 step, one gobo, one second of time, etc. By default, it controls the intensity level of
the selected channels. If you press and hold any of S1 through S4 when a moving light is selected, you can
also control attributes. If you select edit on any blue box, the level wheel will change that value in
consistent increments (e.g. if you are editing cue time, it will increase or decrease the time in seconds).
Holding [SHIFT] while engaging the wheel will place the wheel in Fine Mode.
2 6
Controls
Light Palette Lighting Control Console
for more details or refer to "Hardware Setup" in the PaletteOS software
DBO
DBO
A
B
[Dead Black Out] - Used to activate a full
stage black out. Configurable as momentary,
toggle, or disabled.
Grandmaster - Used to control overall console
intensity output.
"Dead Black Out (DBO)" on
Advertisement
Table of Contents
