Zoom And Focus Adjustments (Zoomspot Models) - Philips SELECON PLPROFILE4 MKII Installation And User Manual

PLPROFILE4 MKII LED Luminaires
Installation & User's Manual

2. Zoom and Focus Adjustments (Zoomspot Models)

Note: Fixed Beam Angle models have hard/soft focus adjustment only.
To adjust zoom/beam angle and focus:
Step 1. Make sure all frame shutters are open (out of beam path). See "Beam Shutter Operation" on page 14 for
more information.
Step 2. As shown in Figure 7, loosen Zoom Adjustment Knob and set beam angle as desired.
Step 3. Hand-tighten Zoom Adjustment Knob to lock position.
Step 4. Loosen Focus Adjustment Knob.
Step 5. Move Focus Adjustment Knob along forward (or back) until beam focus is set as desired.
Step 6. Hand-tighten Focus Adjustment Knob to lock position.
Shutter (4 ea.)
Lens Tube Assembly
Focus Adjustment Knob
Zoom Adjustment Knob
Figure 7: Zoom and Focus Adjustment Knobs
13
Zoom and Focus Adjustments (Zoomspot Models)