Ultium Footswitch SmartLead User Manual
12 Troubleshooting
Symptom: Problem with the EMG Sensor recognizing the SmartLead
Possible Reason
•
SmartLead is disconnected or loose
•
Firmware in the Sensor is outdated. The EMG
Sensor Status LED may be solid Yellow.
12.1 Website Link to FAQ
Answers to common questions can be found at Noraxon's Frequently Asked Questions (FAQ) website
page at this link:
https://www.noraxon.com/support-learn/technical-support/faqs/
Other educational material is available at this link:
https://www.noraxon.com/support-learn/technical-support/
(Rev C May 2019)
Remedial Action
•
Check that the SmartLead is inserted fully.
•
Sensor firmware is periodically updated to
support newly designed SmartLeads. Make
sure you have installed the latest version of
MR3 and run a firmware update if needed.
26