Analog Output Table of Contents Ultium ™ Biomechanics ......................... i Research System ..........................i Analog Output Module ....................... i User Manual ..........................i Table of Contents ........................iii 1 Introduction ......................1 1.1 Brief Description ........................1 1.2 Contradictions ........................... 1 2 Definitions .........................1 2.1 Graphic Symbols and Meaning ....................
Page 4
Analog Output 11.1 Website Link to FAQ ......................14 12 Service and Repair ....................15 12.1 Availability of Circuit Diagrams and Component Lists ..........15 12.2 Warranty Information ......................15 12.3 Submitting Technical Support Requests ................ 15 12.4 Returning Equipment ......................15 13 Spare Parts and Consumables ................
1 Introduction 1.1 Brief Description The Ultium Analog Output Module is an accessory to the Ultium EMG System which allows for users to customize their data collection setup. Specifically, a user could use the Analog Output Module to transmit data, collected from the Ultium system, to a 3 party software/program in real- time.
The Ultium Analog Output Module (Part #881) must be utilized in conjunction with the Ultium Receiver (Part #880). As the Noraxon Systems require software to perform its function, the equipment is offered in combination with the following computer program: Noraxon myoRESEARCH ®...
Analog Output 4 General Warning and Cautions 4.1 Risks and Benefits There is no identified risk of physical harm or injury with use of the Ultium Analog Output Module. The benefit provided by use of the Analog Output Module is that it provides users with the freedom to send analog data in real-time to an external program (ex: MATLAB script for highly specialized research protocols).
Analog Output 5 Getting Started 5.1 Quick Start Guides Please see the hardware manual for the appropriate EMG system. P-880: Ultium User Manual 6 Preparing the Product for Use 6.1 Unpacking and Component Identification Ultium Analog Output Module (Part #881) 6.2 Component Inputs, Outputs, and Indicators 1) Ultium Receiver: (Part # 880) Refer to the Ultium System user...
Powered Via: Part #PSU1: 5V DC, 3.0A Power Supply (See Section 8) Analog Signal Transmitted to 3 Party Data Acquisition Unit or a Noraxon Analog Input System (Part #222) via: 25-Pin Male to Female Cable: (Part #291D) 6.3 Component Interconnections...
Analog Output Step 3 Connect the Ultium Receiver (Part #880) to the Ultium Analog Output Module (Part #881) via one of the three Auxiliary Ports (AUX1, AUX2, or AUX3). Step 4 Connect the Analog Output Module (Part #881) to a 3 Party Data Acquisition Unit (DAQ) via 25-Pin Male to Female Cable (Part #291D)
MR3 software 6.6 Companion Software Configuration Before the Ultium Analog Output Module can be used with the Noraxon Ultium system, the companion software must be configured to recognize the different components that make up the system.
Page 12
Analog Output With the Analog Output Module properly connected (see Component Interconnections above), the data collected in MR3 will be automatically sent to the third part data acquisition unit that is connected via a 25-pin male to female cable (Part #291D). Each module allows for the transmission of up to 16 channels.
Page 13
Analog Output Please refer to the Ultium User Manual for instructions on how to collect data in MR3. P-881 Rev B (May 2019)
Never use the Noraxon Ultium System on a person with an implanted pacemaker • Never operate the Noraxon Ultium System within 1 meter of any critical medical device 7.2 Normal Functions with Interface to a PC Consult the user manual for the companion software for descriptions of the setup, playback and analysis of the data acquired by the Ultium system.
Analog Output 7.5 Storage and Protecting Between Usages For extended storage or when travelling: • Place all sensors into the sensor docking station and power them off. (Press the power button on the back of the Ultium receiver. When the sensors are shutdown they will stop blinking completely.) •...
Analog Output 291D 25-Pin Male to Female Cable As new accessories may be available after the time of printing, please check the Noraxon website at this link for the latest offerings https://www.noraxon.com/ 9 Cleaning 9.1 Safety Precautions When Cleaning WARNING Only use a damp cloth with mild soap and water or isopropyl alcohol to clean the Ultium SmartLeads.
10.3 Companion Software Updates • Perform a backup of the data folders to a separate drive as a precaution. • Click on the Patch/Update link provided in the email or as given on the Noraxon website. • Download the Patch/Update file. •...
MR3 and run a firmware update if needed. 11.1 Website Link to FAQ Answers to common questions can be found at Noraxon’s Frequently Asked Questions (FAQ) website page at this link: https://www.noraxon.com/support-learn/technical-support/faqs/ Other educational material is available at this link: https://www.noraxon.com/support-learn/technical-support/...
Page 19
Analog Output Module, where applicable. 12.2 Warranty Information Noraxon equipment including optional items is guaranteed to be free from defects in material and workmanship for 1 year from the date of purchase. The warranty period begins on the date of product shipment from Scottsdale, Arizona.
Page 20
If you are shipping from outside the USA please use UPS, FedEx, DHL, or EMS (US Postal Service) and not a freight-forwarder. Using a freight-forwarder incurs additional brokerage fees. If a package is shipped to Noraxon via a carrier other than the ones listed above, it may be refused. 13 Spare Parts and Consumables 13.1 Consumable Items...