Companion Software Installation; Companion Software Configuration - Noraxon Ultium EMG User Manual

Ultium Footswitch SmartLead User Manual

7.5 Companion Software Installation

The Footswitch SmartLead is compatible with several different software programs. Identify the
companion software that accompanied the equipment (MR3) and follow the appropriate instructions
given next.
7.5.1 MR3 Installation
1. Insert the MR3 feature map into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
4. Double click

7.6 Companion Software Configuration

Before the Footswitch can be used with the Noraxon Ultium system, the companion software must be
configured to recognize the different components that make up the system. Refer to the Ultium
system's hardware manual for instructions on the software module (MR3 myoMUSCLE) supplied with
the Noraxon system. For specific settings for the Footswitch SmartLead see below:
When assigned to a channel using the serial number, the software should automatically detect the
sensor as a Footswitch SmartLead:
(Rev C May 2019)
on the icon to start the MR3 software
14