Ultium Footswitch SmartLead User Manual
9.3 Normal Functions with Interface to a PC
When used with the companion software the Footswitch SmartLead displays and records signals like
the image below:
Consult the user manual for the companion software for descriptions of the setup, playback and
analysis of the data acquired by the Ultium system.
9.4 Exceptional Functions/Situations (error messages)
Please see the appropriate Noraxon system's hardware manual for possible error messages.
9.5 Shutdown after Use
At the end of the day:
•
Place all EMG sensors inside the sensor docking station(s).
•
Press the Sensor Power button on the Receiver to power all sensors off.
9.6 Storage and Protecting Between Usages
For extended storage or when travelling:
•
Place all sensors into the sensor docking station and power them off by pressing the Receiver
power button. When the sensors are shutdown they will stop blinking completely.
•
The sensors are reactivated by pressing the Receiver power button.
(Rev C May 2019)
23