Maintenance; Device Software (Firmware) Updates; Maintenance By Qualified Individuals; Companion Software Updates - Noraxon Ultium EMG User Manual

Ultium Footswitch SmartLead User Manual

11 Maintenance

11.1 Device Software (firmware) updates

The internal program (firmware) inside the various Ultium devices can be updated via MR3. The user
will be notified within the Ultium System hardware setup if an update is required. Ensure that all
sensors are placed in the Ultium charging doc and that the charging doc is connected to the Ultium
receiver prior to initiating the firmware update. If you start the update prior to completing this step, you
may need to update again (firmware update button will still be present in hardware setup).

11.2 Maintenance by Qualified Individuals

The following activities should only be undertaken by PC support (IT) personnel, equipment technicians
or those with suitable training.

11.3 Companion Software Updates

•
Perform a backup of the data folders to a separate drive as a precaution.
•
Click on the Patch/Update link provided in the email or as given on the
•
Download the Patch/Update file.
•
To install the Patch/Update, click "Run" on the dialog box. No password is required.

11.4 Attention

All EMG sensors should be fully charged before a firmware update is performed.
(Rev C May 2019)
Noraxon website.
25