Noraxon Ultium EMG User Manual page 15

Ultium Footswitch SmartLead User Manual
7.6.1 MR3 Configuration
(Rev C May 2019)
Step 1
Enter the Hardware Setup
screen and setup the Noraxon
EMG system in accordance
with its provided hardware
manual.
Step 2a
Click 'Detect Sensors in
Charger' (All sensors which you
would like to use must be in
the charger) – this will add the
SmartLead(s) to the list of
sensors (only if the unique
SmartLead is connected to
their corresponding sensor).
If the unique SmartLead (ex:
Footswitch) is not connected
to the corresponding sensor
during detection, MR3 will
assume you are using the
sensor to collect EMG data.
Click OK.
15