Ultium Footswitch SmartLead User Manual
Footswitch User Manual (part #802A) This document
If additional accessories have been included please see Section 9, Accessories for component
identification.
7.2 Component Inputs, Outputs and Indicators
1 EMG Sensor (front and top edge)
2 EMG Sensor (back and bottom edge)
(Rev C May 2019)
Strap 18 inch (Part #ES1)
Additional contents not illustrated
Smart Lead Connector – Connector for
smart leads to change function of EMG
sensor.
Status LED – Sensor operational indicator
flashes green when measuring. Solid
Yellow when charging.
Power Button – Power the sensor On/Off.
Hold for 3+ seconds for a hard reset.
Charger Contacts – Sensor battery is
charged and sensor data is exchanged
through these points.
Serial Number – Unique 5-character serial
number which identifies each EMG sensor.
11