Ultium Footswitch SmartLead User Manual
10 Cleaning
10.1 Safety Precautions When Cleaning
WARNING
Only use a damp cloth with mild soap and water or isopropyl alcohol to clean the
bottom of the Ultium Sensors.
Do not immerse Ultium Sensors in any water or liquid.
10.2 Cleaning by Users
The Footswitch FSR's should be wiped off with a damp cloth between uses. The individual sensors are
replaceable parts and should be replaced when damaged.
The Footswitch insoles should be wiped off with a damp cloth between uses. The foot insoles should
be replaced when damaged.
(Rev C May 2019)
24