Using Gun Remote (K5 Level) - Kemppi Flexlite GX Series Operating Manual

4.1 Using gun remote (K5 level)

The Flexlite GX K5 level welding gun remote can be used with Kemppi Fastmig equipment only.
Adjust the wire feed speed or change the memory channel by turning the roller switch on the gun handle.
Tip: With the screw in front of the roller switch, under the rubber cap, it is possible to change the wheel's
stepwise responsiveness. Fully stepless adjustment is best suited for adjusting the welding current.
© Kemppi
24/49
Flexlite GX
Operating manual - EN
1921390 / 2002