Operation - Kemppi Flexlite GX Series Operating Manual

4. OPERATION

Before using the equipment, ensure that all the necessary installation actions have been completed according to
your equipment setup and instructions.
Welding is forbidden in places where there is an immediate fire or explosion hazard!
Welding fumes may cause injury. Take care to ensure sufficient ventilation during welding and wear respiratory pro-
tection!
Always check before use that interconnecting cable, shielding gas hose, earth return lead/clamp and mains cable are
in serviceable condition. Ensure that the connectors are correctly fastened. Loose connectors can impair welding per-
formance and damage connectors.
The exact function of the gun and trigger may vary depending on your welding machine settings (e.g. 2T, 4T or Mini-
log).
To start welding, press the trigger switch.
"Using gun remote (K5 level)" on the next page
"Using gun remote (K8 level)" on page 25
For more information on component selection and availability, refer to "Component selection" on page 47 and
"Ordering codes" on page 49.
© Kemppi
23/49
Flexlite GX
Operating manual - EN
1921390 / 2002