Installation - Kemppi Flexlite GX Series Operating Manual

3. INSTALLATION

Ensure that the welding equipment is not connected to the mains or that the welding gun is not connected to the
welding machine until the installation is complete.
Protect the equipment from rain and direct sunshine.
"Assembling gun" on the next page
"Installing gun remote" on page 10
"Connecting gun" on page 12
"Installing and replacing wire liner" on page 13
"Installing and replacing wire liner for multi-neck" on page 16
"Installing and removing grip handle (optional)" on page 21
"Adjusting and tightening neck (gas-cooled models)" on page 22
Before installation and use
Ensure compliance with your local and national safety requirements regarding the installation and use of high
voltage units.
Check the contents of the packages and make sure the parts are not damaged.
© Kemppi
8/49
Flexlite GX
Operating manual - EN
1921390 / 2002