Top Cover With Display Assembly; Removing The Top Cover With Display Assembly - Toshiba TECRA 9100 Series Maintenance Manual

Hide thumbs Also See for TECRA 9100 Series:

Table of Contents

4.8 Top Cover with Display Assembly

To remove the top cover with display assembly, follow the steps below and refer to figures

4-20 to 4-23.

1. Turn the computer upside down, and remove the following 12 screws:

• One M2.5×8 black flat-head screw

• Six M2.5×16 screws

• Four M2×12 black flat-head screws

• One M2.5×4 screw

M2.5×8 black flat-head screw

Figure 4-20 Removing 12 screws from the bottom of the computer

M2.5×16 screws

M2×12 screws

4 Replacement Procedures

M2.5×8 black flat-head screws

M2.5×16 screw

TECRA 9100 Maintenance Manual (960-347)

Show Quick Links

Table of Contents