Wireless Lan Troubleshooting; Procedure 1 Transmitting-Receiving Check; Procedure 1 - Toshiba TECRA 9100 Series Maintenance Manual

2 Troubleshooting Procedures

2.14 Wireless LAN Troubleshooting

This section describes how to determine if the computer's Wireless LAN is functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Transmitting-Receiving Check
Procedure 2: Antennas' Connection Check
Procedure 3: Antennas' Capability Check
Procedure 4: Replacement Check

Procedure 1

Transmitting-Receiving Check
Make sure the wireless switch on the left side of the computer is turned ON. If it is not, slide
the switch toward the back of the computer to turn it on.
Check 1 Execute test program CERT201T.EXE to check the transmitting-receiving
function of the wireless LAN. You will need a second computer that can
communicate by the wireless LAN. Perform the test following the instructions
described in Section 3.27, Wireless LAN Test Program (CERT201T.EXE).
If the computer passes the test, the function is correctly working.
If the computer does not pass the test, perform Procedure 2.
2-52

2.14 Wireless LAN Troubleshooting

TECRA 9100 Maintenance Manual (960-347)