Toshiba TECRA 9100 Series Maintenance Manual page 247

4.8 Top Cover with Display Assembly
2. Turn the computer right side up, open the display panel and disconnect the IPS cable
from PJ122, the FL/LCD cable from PJ76 and the speaker cables from PJ127 and
PJ129 on the I/O board.
3. Remove two M2.5×8 screws.
4. Remove one M2.5×13 black screw.
M2.5×13 black screw
M2.5×8 screws
PJ127
4-35
PJ129
Figure 4-22 Disconnecting the cables
4 Replacement Procedures
LCD/FL cable
IPS cable
TECRA 9100 Maintenance Manual (960-347)
PJ76
PJ122