Toshiba TECRA 9100 Series Maintenance Manual page 228

4 Replacement Procedures
5. Place the HDD pack on a flat surface, and remove four M3×4 flat-head screws.
6. Remove the HDD bracket.
M3×4 silver flat-head screws
7. Remove the connector.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
4-16
Figure 4-7 Removing screws and HDD bracket
Figure 4-8 Removing the connector
M3×4 silver flat-head screws
HDD
Connector
TECRA 9100 Maintenance Manual (960-347)
4.2 HDD