Accessing The Setup Program - Toshiba TECRA 9100 Series Maintenance Manual

3.24 SET UP
3.24.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the TSETUP
screen. The TSETUP screen is divided into two pages: SYSTEM SETUP (1/2) and SYSTEM
SETUP (2/2).
MEMORY
Total
PASSWORD
Not Registered
BATTERY
Battery Save Mode
PERIPHERAL
Pointing Devices
Ext Keyboard "Fn"
Parallel Port Mode
Hard Disk Mode = Enhanced IDE (Normal)
DISPLAY
Power On Display
LCD Display Stretch = Disabled
CONFIGURATION
Device Config. = Setup by OS
I/O PORTS
Serial = COM1(3F8H/IRQ4)
Parallel = Not Used
PCI BUS
PCI BUS = IRQ11
LEGACY EMULATION
USB KB/Mouse Legacy Emulation
USB-FDD Legacy Emulation = Enabled
↑↓→←:Select items
Esc:Exit without saving
TECRA 9100 Maintenance Manual (960-347)
SYSTEM SETUP (1/2)
= XXXXX KB
= User Setting
= Auto-Selected
= Disabled
= ECP
= Auto-Selected
SYSTEM SETUP (2/2)
= Enabled
Space,BkSp:Change values
Home:Set default values
3 Tests and Diagnostics
ACPI BIOS version = x.xx
OTHERS
Power-up Mode
CPU Cache
Level 2 Cache
Processor Serial Number = Disabled
Dynamic CPU Frequency Mode
= Dynamically Switchable
Auto Power On
BOOT PRIORITY
Boot Priority = HDD→FDD→CD-ROM→LAN
HDD Priority
= Built-in HDD→Second HDD
Power On Boot Select
ACPI BIOS version = x.xx
PC CARD
Controller Mode = Auto-Selected
DRIVES I/O
Built-in HDD
= Primary IDE(1F0H/IRQ14)
Select Bay
= Secondary IDE(170H/IRQ15)
PCI LAN
Built-in LAN = Enabled
PgDn,PgUp:Change pages
End:Save changes and Exit
= Boot
= Enabled
= Enabled
= Disabled
= Enabled
3-55