4.10 Display assembly
4
4.10 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-15 to
4-20).
1. Close the display and turn the computer upside down.
2. Remove the following screws from the bottom of the computer.
• M2.5×8.0B
Figure 4-15 Removing the screws (securing display assembly)
4-28
FLAT BIND screw
(Locktight)
M2.5x8.0B FLAT BIND
QOSMIO G10 Maintenance Manual (960-497)
4 Replacement Procedures
x2
(Locktight)