4 Replacement Procedures
4.8 Top cover
Removing the Top cover
To remove the Top cover, follow the steps below and refer to Figures 4-15 to 4-17.
1. Remove the following screws securing the bottom case to the toip case.
M2.55L FLAT HEAD screw
M24L
M23L
M27L
M2.5X5
M2X4
2. Turn the bottom case face up and remove the following screws securing top cover.
3. Disconnect the connector on the main board
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]
Downloaded from LpManual.com Manuals
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
M2X3L
Figure 4-15 Removing the screws on bottom case
M24L
FLAT HEAD screw
6
6
3
3
M2X7
5
M2.5X5
M2X4
4-29