4 Replacement Procedures
4.2
HDD
CAUTION: When handling the HDD, do not press the top surface as shown by the arrow.
Hold it by the sides.
Removing the HDD
To remove the HDD, follow the steps below and refer to figures 4-5 to 4-8.
1. Turn the computer upside down.
2. Remove one M2.5×6 silver flat-head screw securing the HDD cover.
3. Remove the cover by sliding it in the direction of the arrow.
M2.5×6 silver flat-head screw
4-14
HDD cover
Figure 4-5 Removing the HDD cover
TECRA 9100 Maintenance Manual (960-347)
4.2 HDD