Toshiba TECRA 9100 Series Maintenance Manual page 306

4 Replacement Procedures
15. Remove the upper two lens sheets taking care not to damage or contaminate them
with the tape or frame. The upper two lens sheets have two tabs on the left side and
one tab on the right side.
16. Remove the lower two lens sheets. Do not remove the sheet-fixing tape on the frame.
17. Remove the light guide and reflective sheet from the hooks on both the ends of the
edge of the frame taking care not to damage or contaminate them.
18. Remove the low-voltage FL cable from the frame taking care not to pull the lamp
element.
19. Remove the double-faced tape from the center of the reflector taking care not to break
the plastic frame.
20. Remove the U-shaped hook of the high-voltage side of the reflector from the frame.
4-94
4.26 FL (Model 14.1 XGA Toshiba)
TECRA 9100 Maintenance Manual (960-347)