4 Replacement Procedures
8. Turn the LCD module upside down.
9. Remove two screws securing the lamp cover.
10. Remove the lamp cover.
11. Gently remove the FL taking care not to damage it.
Loosen the screws with 0.1078N⋅m (1.1kgf⋅cm) of torque.
Figure 4-74 Removing the lamp cover and the FL
4-104
4.27 FL (Model 14.1 XGA Sharp)
Screw
Lamp cover
TECRA 9100 Maintenance Manual (960-347)
Screw
FL