Toshiba TECRA 9100 Series Maintenance Manual page 314

4 Replacement Procedures
3. Remove four screws from the side of the LCD module.
Screws
Loosen the screws with 0.1078N⋅m (1.1kgf⋅cm) of torque.
4. Turn the LCD module right side up.
5. Release two latches on the lamp side of the top frame.
4-102
Figure 4-71 Removing the screws
Latches
Figure 4-72 Removing the top latches
4.27 FL (Model 14.1 XGA Sharp)
TECRA 9100 Maintenance Manual (960-347)
Screws