Advertisement
KINROAD 150 SERVICE MANUAL
2.
If the spark plug is too tight to remove, spray rust inhibiter on the spark plug washer and the thread part.
Rotate the spark plug after soaking.
Clear up the filth and carbon accumulation on the spark plug with a steel brush or a blade.
Inspect the spark plug gap; in general it should be about 0.6 - 0.8 mm.
When the carbon accumulation and wear of the spark plug are too serious, replace the spark plug. Replace
a spark plug of the same specification.
TIRE PRESSURE / WEAR
Check the tire pressure every time the vehicle is ridden.
The tire pressure is very important for the stability of the ride.
Tire pressure
Front
175 kpa
Rear
200 kpa
BRAKE PERFORMANCE
1.
Always check that there is plenty of brake fluid in the brake fluid
reservoir.
2.
Check that the front/rear brake pads are in good condition
3.
Check the brake rotor for abnormal wear.
AIR CLEANER
Clean the air cleaner quarterly or more often in dusty conditions.
If the air cleaner is clogged with dust, performance will be severely
decreased; even engine damages can occur. Check and clean in the
following manner.
PAPER FILTER MAINTENANCE
1.
Remove the air cleaner from its housing.
2.
Tap the filter on an object knocking dust from filter.
3.
Replace the element if it is wrinkled or torn.
9
VERSION 1, DEC., 2005
Advertisement
