Advertisement
KINROAD 150 SERVICE MANUAL
The picture shows structure of a common generator.
1. Cooling fan
2. Generator assembly
3. Flywheel comp.
4. Stator comp.
5. Washer
PRIMARY COIL INSPECTION
The inspection work can be done on the engine, and there is no need to remove the generator.
Remove the 4-core connector of the generator.
Measure the resistance value between the white wire of the generator and connecting wire of the vehicle
body.
When the actual value is more than the standard value, the coil should be replaced.
GENERATOR REMOVAL AND INSPECTION
Standard value
6. Bolt
7. Nut
8. Bolt
9. Bolt
0.2-0.4 Ω(20℃)
66
VERSION 1, DEC., 2005
Advertisement
