Advertisement
KINROAD 150 SERVICE MANUAL
VERSION 1, DEC., 2005
GENERATOR REMOVAL
Remove the cooling fan cover bolt and screw.
Remove the cooling fan cover.
Remove the cooling fan bolt, and remove the cooling fan.
Hold the flywheel with a universal holding wrench, at the same
time remove the flywheel nut.
Remove the flywheel with a flywheel puller, and remove the solid
key.
Remove the generator wire connector.
Remove the generator wire holder.
Remove the generator coil bolt.
Remove the generator wire rubber bushing from the right crankcase.
Remove the coil set.
Do not damage the coil when removing.
GENERATOR INSTALLATION
67
Advertisement
