Advertisement
KINROAD 150 SERVICE MANUAL
OIL PUMP ASSEMBLY
Assemble the inner and outer rotors of the oil pump, and
mount the oil pump shaft.
When assembling, align the unfilled corner of
the oil pump shaft with the corner of the inner
rotor, and then assemble.
Mount the dowel pin.
After aligning the oil pump plate with the dowel pin, install it.
Tighten the oil pump plate screws.
After assembling, gently turn the oil pump shaft, and make
sure the oil pump can turn smoothly.
OIL PUMP INSTALLATION
Install the oil pump on the crankcase.
Before installing, fill the oil pump with oil. When
installing, the arrow of the oil pump body must be
upwards.
Tighten the oil pump positioning bolts.
Align the oil pump driving gear with the oil pump shaft unfilled
corner, then assemble the driving gear, chain.
33
VERSION 1, DEC., 2005
Advertisement
