Advertisement
KINROAD 150 SERVICE MANUAL
VERSION 1, DEC., 2005
LUBRICATION SYSTEM INSPECTION AND SERVICING
GENERAL INTRODUCTION
The picture shows the functional diagram of the lubrication system. After the lubrication oil crosses the filter
screen, it is pumped by the rotator oil pump; some of it goes into the big end of the connecting rod, and
splashes on the cylinder wall and the small end of the connecting rod; the other goes through some oil
passages, such as the shaft neck of the camshaft, and splashes on the cam rockshaft and cam chain. The
lubrication oil that falls back into the oil groove can be re-circulated.
OIL SYSTEM INSPECTION AND REPLACEMENT
OIL REPLACEMENT
Tighten the dipstick.
Remove the oil filter screen cap and the screen to let the oil flow out.
30
Advertisement
