KINROAD 150 SERVICE MANUAL
DRIVEN BELT PULLEY INSPECTION
Measure the free length of the driven belt pulley spring.
Service limit
Inspect if there is any abrasion or damage on the driven plate.
Measure the outer diameter of the driven plate pulley hub.
Service limit
Inspect if there is any abrasion or damage of the movable driven
plate.
Measure the inner diameter of the movable driven plate.
Service limit
Inspect if the groove of the guide pin is worn.
DRIVEN PLATE BEARING REPLACEMENT
If the driven plate needle bearing and the ball bearing are loose, damaged, or have some unusual
sound, they should be replaced.
Remove the needle bearing from the driven plate.
The removed bearing cannot be reused.
163.7mm
33.94mm
34.06mm
54
VERSION 1, DEC., 2005