Advertisement
KINROAD 150 SERVICE MANUAL
REAR AXLE REMOVAL
Disassemble RR. Wheel
Remove the Cotter Pins on Axle Nut, RR Wheel
Remove the Axle Nut, RR. Wheel.
Block up rear end of the machine.
Remove rear wheel and hub assembly by sliding off
splines of axle.
Remove the chain.
Loosen nuts on bearing carrier and remove bolts.
Remove axle and bearing carriers as a unit.
REAR. SWING ARM
Note: Swing arm, axle and motor can be removed
as a unit if needed.
Remove Rear. Shock.
Remove rear brake caliper and set aside.
Do not remove brake hose!
Unplug brake light wiring from the electrical box.
Remove throttle cable.
Remove bolts from swing arm pivot
Check Buffer Rubber Bushing for wear. If wear is present on bushing, it should be replaced.
5. CHASSIS
74
VERSION 1, DEC., 2005
Advertisement
