Advertisement
KINROAD 150 SERVICE MANUAL
amount of grease to the lip of the seal. If the retention spring is in bad shape, replace the seal with a
new one.
SEAT
Remove all the Nuts and Bolts underneath the seat rail.
Remove the seat.
STEERING SHAFT
Remove Nuts, Steering Block and grease inside of
Steering Block periodically.
Loosen Steering Shaft and Clamp Nut, Steering Gear
Box.
Remove Steering Shaft.
STEERING GEAR BOX AND BALL HEAD, STEERING
GEAR BOX
Remove four bolts on LH&RH Clamp Nut, Steering Gear
Box.
Remove and check Ball Head Dust Cover, Steering Gear
Box for wear.
Check Steering Cover on both sides of Steering Gear Box
and Grease the Ball Head.
Steering Gear Box, fill with Grease after cleaning the dust.
It is recommended to replace the Ball Joint if it is loose or
not smooth.
THROTTLE & BRAKE PEDAL
Remove Throttle, Throttle Pedal and Axle Nut. Check for
signs of wear. Replace if wear is present. Fill with grease
in order to make the Throttle & Brake Pedal swing more
flexible before installation.
76
VERSION 1, DEC., 2005
Advertisement
