Error And Maintenance Indications - Brother ADS-4300N Online User's Manual

Home > Troubleshooting

Error and Maintenance Indications

Related Models: ADS-4300N
The LED indications on the control panel are explained in this table.
If there is an error that you cannot clear yourself, contact your Brother dealer or Brother customer service.
Error Indicator
Error Indicator Power Indicator Machine Status
> Error and Maintenance Indications
Power Indicator
Document Jam
Clear the document jam. If scanning a long document, select Long Paper from
the Scan Size or Document Size drop-down list.
Pick Up Document Error
The machine cannot pick up the document. Open the Front Cover and remove
the document. Close the Front Cover and reload your document.
Multifeed Detection Error
More than one page was fed at one time or the original document contains
multiple paper lengths. Clear the multifeed, check your paper lengths, and then
try to scan again.
Front Cover Open
The Front Cover is open.
Access Error
• Scan to PC
- The USB cable is not connected to the machine. Connect the USB cable.
• Scan to USB
- A USB flash drive is not inserted into the machine. Insert a USB flash
drive.
- The USB flash drive was removed while it was being accessed. Reinsert
the USB flash drive.
Unusable Device
• An unsupported USB device is inserted in the USB port. Remove the device.
Too Many Files on USB (Scan to USB)
Your machine cannot save to a USB flash drive if it contains too many files.
Remove the USB flash drive, and then do one of the following:
• Delete unused files or folders from the USB flash drive, and then try again.
• Use a USB flash drive that has available space.
Description
The LED is off.
The LED is on.
The LED is blinking.
225