Setting Up The Card Authentication For Users (For Ads-3600W); Setting Up And Changing The Public User Mode - Brother ADS-2400N User Manual

General Information

Setting Up the Card Authentication for Users (For ADS-3600W)

Before setting up the card authentication users, you must set up restricted operations and a user list using
the web browser.
For more information, see Configure Secure Function Lock 3.0 Using Web Based Management on page 42.
1
Switch to the restricted user mode using the Touchscreen (for more information, see Switching to the
restricted user mode using the Touchscreen on page 46).
2
Press
XXXXX
3
Press Register Card.
4
Touch the card to the NFC Reader. The Touchscreen displays the card ID.
5
Press OK.
NOTE
• To change the card ID, touch the new card to the NFC Reader in step 4.
• If the card is in a case or cover, the NFC Reader may not be able to detect it. Always remove the card from
a case or cover when you touch the card to the NFC Reader.

Setting Up and Changing the Public User Mode

The public user mode restricts the operations that are available for all users who do not have a password.
To set up restrictions for public users, use Web Based Management or BRAdmin Professional 3 (Windows
only) (see the Network User's Guide).
1
Click Administrator.
2
Click Restricted Functions xx-xx.
.
1
1
1
®
44