Chapter 5 Service Functions; Maintenance Mode; How To Enter Maintenance Mode; Method Of Entering Maintenance Mode For Service Personnel - Brother ADS-3000N Service Manual

Advanced
Hide thumbs Also See for ADS-3000N:
Table of Contents

Advertisement

CHAPTER 5 SERVICE FUNCTIONS

1. MAINTENANCE MODE

Maintenance mode is exclusively designed for checking and setting the machine using the
keys on the control panel.
1.1

How to Enter Maintenance Mode

1.1.1 Method of entering maintenance mode for service personnel

<Operating Procedure>
(1) Press and hold the [X] and [to USB] keys simultaneously, and plug the AC power cord
into the outlet. Check that the Power LED and the Error LED are lit, and release these
two keys.
(2) Press the [X], [to USB], [to PC], and [X] keys in this order.
The to PC LED and the to USB LED light, and the to Network Device1 LED, to Network
Device2 LED, and to Network Device3 LED flash.
(3) Press the [X] key. All LEDs go out and the machine enters function number selection
mode of the maintenance mode for service personnel.

1.1.2 Method of entering end-user accessible maintenance mode

The maintenance mode functions should only be accessed by service personnel. However,
end users are allowed to use some of these functions under the guidance of service personnel
over the phone. End users can only use the functions shaded in the table on the
<Operating Procedure>
(1) Press and hold the [to PC] and [to USB] keys simultaneously, and plug the AC power
cord into the outlet. Check that all LEDs are lit, and release these two keys.
The to PC LED and the to USB LED light, and the to Network Device1 LED, to Network
Device2 LED, and to Network Device3 LED flash.
(2) Press the [X] key. All LEDs go out and the machine enters function number selection
mode of the end-user accessible maintenance mode.
5-1
next
page.
Confidential

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ads-2400n

Table of Contents