4. In the Inspector window, select the menu "Measuring system details" again.
In the screen form, the following setting options are displayed:
Figure 4-35
5. Make the detailed settings for the encoder in the white fields.
The gray fields are automatically corrected in accordance with your settings.
Result
You have made the detailed settings for the selected encoder in your device configuration.
4.4.9
Inserting additional system components
Various system components can be inserted (additionally) in the device configuration of your
drive:
● CBE20 Communication Board
● Terminal Module
● Terminal Board
● VSM10 Voltage Sensing Module
Since the handling of these system components differs when inserting, the insertion
procedure is described separately in the following for each system component.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Encoder details
4.4 Creating a project offline in Startdrive
Commissioning
123