Deleting the component
Delete the components that you no longer require.
1. Right-click in the gray border.
A shortcut menu opens.
Figure 4-12
2. To delete the DRIVE-CLiQ component, select "Delete" from the shortcut menu.
The component is deleted from the editor.
Note
You can undo the delete operation using shortcut key <Ctrl>+<Z>.
4.4.5.5
Editing a DRIVE-CLiQ connection
DRIVE-CLiQ connections
Blue lines are used to show DRIVE-CLiQ connections between the various components. The
connections must be created in accordance with the real wiring in the OFFLINE project.
When creating a component, the connections are drawn with the default settings. You must
manually correct the connections in the device view if your real wiring deviates from this.
Working with DRIVE-CLiQ connections is explained using an infeed unit as example. The
procedure is identical for all other components.
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0
Deleting a DRIVE-CLiQ component
4.4 Creating a project offline in Startdrive
Commissioning
95