Siemens SINAMICS S120 Commissioning Manual page 46

Startdrive commissioning tool
2.3 User interface - parameterization
①
②
③
④
⑤
⑥
Figure 2-9
44
Creation information (optional)
The components assigned to the modules or main components
Non-assignable components
Activates the parallel connection view. In the parallel connection view, only the parallel connec-
tion-capable components are displayed.
Drive object type of the motor controls
Drive object type
•
Component type
•
Identification via LED. Is controlled on the Control Unit via parameters p9210 and p9211.
•
DRIVE-CLiQ connection of the component
•
Article number of the component
•
Device configuration detection
Commissioning with Startdrive
Commissioning Manual, 12/2018, 6SL3097-5AA10-0BP0