YASKAWA PROFINET 1000 Series Technical Manual page 44

9 Web Interface
Network Tab
The Network tab shows the status of the option network traffic and the status of open I/O connections.
Figure 16
Network Monitor
Msg Tx OK
Msg Rx OK
Current Connections
Control Connection Delta Time
Msg Tx Dropped
Msg Rx Dropped
Collisions
Msg Tx Errors
Msg Rx Errors
Tx Retry
Note: Cumulative counters are reset when the power supply is cycled.
44
Figure 17 Network Tab View
Table 29 Network Monitor Descriptions
Cumulative number of messages transmit successfully from SI-EP3.
Cumulative number of messages received successfully to SI-EP3.
Current number of open connections.
The time between the last two writes to the Control register, MEMOBUS/Modbus address 0001H.
Cumulative number of messages dropped due to output network buffer being full and unable to hold the new
message.
Cumulative number of messages dropped due to input network buffer being full and unable to hold the new
message.
Cumulative number of collisions (half duplex only) reported by the MAC/PHY (Media Access Control/
Physical Connection).
Cumulative number of transmit underruns and transmit stops reported by the
MAC/PHY.
Cumulative number of receive overruns, receive stops, and receive error frames reported by the MAC/PHY.
Cumulative number of transmits in which the 1st attempt was delayed due to busy medium reported by the
MAC/PHY.
YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
Explanation