YASKAWA PROFINET 1000 Series Technical Manual page 23

Table 9 PROFIDrive Compatible Status Word for the PROFIdrive Communication Profile
Bit Name
0 RDY_ON
1 RDY_RUN
2 RDY_REF
3 TRIPPED
4 OFF_2_STA
5 OFF_3_STA
6 SWC_ON_INHIB
7 ALARM
8 AT_SETPOINT
9 REMOTE
10 ABOVE_LIMIT
11 to 15 -
YASKAWA SIEP YEACOM 07A 1000-Series Option PROFINET SI-EP3 Technical Manual
Value
1 READY TO SWITCH ON.
0 NOT READY TO SWITCH ON.
1 READY TO OPERATE.
0 OFF1 ACTIVE.
1 ENABLE OPERATION.
0 DISABLE OPERATION.
1 FAULT.
0 No fault.
1 OFF2 inactive.
0 OFF2 ACTIVE.
1 OFF3 inactive.
0 OFF3 ACTIVE.
1 SWITCH-ON INHIBIT ACTIVE.
0 SWITCH-ON INHIBIT NOT ACTIVE.
1 Warning/Alarm.
0 No Warning/Alarm.
1 OPERATING. Actual value equals reference value (i.e., is within tolerance limits).
0 Actual value differs from reference value (i.e., is outside tolerance limits).
1 Drive control location: REMOTE.
0 Drive control location: LOCAL.
- Not supported.
- Reserved
7 PROFINET Messaging
STATE/Description
23