Setting Target Weight and PreAct
Press the
The screen will show:
To Change the target that is shown. (Same process for Pact and
Dribble)
o Type in the new weight and press
o Or if it is correct just press the
The screen will now show:
o This is changed just like the Target.
o The Dribble set point is the amount of weight that will
be put into the bag at the slower fill speed. I.E.> If you
set it to 10 lbs. the bagger will run in the slow speed for
the last 10 lbs. of the fill.
The screen will now show:
o This is changed just like the Target.
o It is used to compensate for overweight bags. I.E.> If
your weight is consistently 2 lbs. over you can put 2
lbs. here and it will bring you to the correct weight.
Key
39
key
key